Description
Atmel TS8xC51Rx2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS8xC51Rx2 retains all features of the 80C51 with extended ROM/EPROM capacity (16/32/64 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters.

FEATUREs
• 80C52 Compatible
– 8051 pin and instruction compatible
– Four 8-bit I/O ports
– Three 16-bit timer/counters
– 256 bytes scratchpad RAM
• High-Speed Architecture
– 40 MHz @ 5V, 30MHz @ 3V
– X2 Speed Improvement capability (6 clocks/machine cycle)
– 30 MHz @ 5V, 20 MHz @ 3V (Equivalent to
– 60 MHz @ 5V, 40 MHz @ 3V)
• Dual Data Pointer
• On-chip ROM/EPROM (16K-bytes, 32K-bytes, 64K-bytes)
• On-chip eXpanded RAM (XRAM) (256 or 768 bytes)
• Programmable Clock Out and Up/Down Timer/Counter 2
• Programmable Counter Array with
– High Speed Output,
– Compare / Capture,
– Pulse Width Modulator,
– Watchdog Timer Capabilities
• Hardware Watchdog Timer (One-time enabled with Reset-Out)
• 2 extra 8-bit I/O ports available on RD2 with high pin count packages
• Asynchronous port reset
• Interrupt Structure with
– 7 Interrupt sources,
– 4 level priority interrupt system
• Full duplex Enhanced UART
– Framing error detection
– Automatic address recognition
• Low EMI (inhibit ALE)
• Power Control modes
– Idle mode
– Power-down mode
– Power-off Flag
• Once mode (On-chip Emulation)
• Power supply: 4.5-5V, 2.7-5.5V
• Temperature ranges: Commercial (0 to 70^oC) and Industrial (-40 to 85^oC)
• Packages: PDIL40, PLCC44, VQFP44 1.4, PLCC68, VQFP64 1.4