Description
The IC U2532B is a complete IR-Transmitter-Receiver IC according to the new IrDA 1.0 standard. ASK-modulation is also possible. Only an external PIN-photodiode and an infrared emitting diode with current limiting resistor must be connected to the corresponding pins. The amplifier with Schmitt-Trigger formed output signal and the IR-driver need no further external components. The IC allows data rates from 2.4 kbit/s to 115.2 kbit/s and up to 500 kHz for ASK-modulation. Two different sensitivity modes, which can be programmed by applying a “High” or “Low” voltage at pin SC, ensure either an increase in transmission distance or a bit error rate of 1E-9. An internal AGC allows proper operation under EMI conditions.

FEATUREs
● Data rates up to 115.2 kbit/s
● Wide supply voltage range (3 to 5.5 V)
● AGC for EMI immunity
● AGC reset
● High and low sensitivity mode
● BER < 1E-9 in the low sensitivity mode
● Power-On reset

APPLICATIONs
● IR data transmission
● Compatible to IrDA
● Bidirectional IR data transmission
● Ability to receive ASK modulation