P80C557E6 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

比赛名单

P80C557E6

Single-chip 8-bit microcontroller

Philips Electronics 

Philips Semiconductors

Single-chip 8-bit microcontroller

Product specification

P83C557E6/P80C557E6

5. ELECTROMAGNETICS COMPATIBILITY (EMC)

IMPROVEMENTS

Primary attention was paid on the reduction of electromagnetic

emission of the microcontroller P8xC557E6.

The following features effect in reducing the electromag– netic

emission and additionally improve the electromagnetic susceptibility:

• Four supply voltage pins (VDD) and four ground pins (VSS) with

pairs of VDD and VSS at two adjacent pins at each side of the

package.

• Separated VDD pins for the internal logic and the port buffers

• Internal decoupling capacitance improves the EMC radiation

behavior and the EMC immunity

• External capacitors are to be located as close as possible

between pins VDD1 and VSS1, VDD2 and VSS2, VDD3 and VSS3 as

well as VDD4 and VSS4 ; ceramic chip capacitors are

recommended (100nF).

• The ALE output signal (pulses at a frequency off CLK/6) can be

disabled under software control (bit 5 in the SFR PCON: “RFI”); if

disabled, no ALE pulse will occur. ALE pin will be pulled down

internally, switching an external address latch to a quiet state. The

MOVX instruction will still toggle ALE (external data memory is

accessed). ALE will retain its normal HIGH value during Idle Mode

and a LOW value during Power-down mode while in the “RFI”

reduction mode. Additionally during internal access (EA = 1) ALE

will toggle normally when the address exceeds the internal

program memory size. During external access (EA = 0) ALE will

always toggle normally, whether the flag “RFI” is set or not.

6. FUNCTIONAL DESCRIPTION

6.1 General

The P8xC557E6 is a stand–alone high–performance microcontroller

designed for use in real time applications such as instrumentation,

industrial control, medium to high–end consumer applications and

specific automotive control applications.

In addition to the 80C51 standard functions, the device provides a

number of dedicated hardware functions for these applications.

The P8xC557E6 is a control–oriented CPU with on–chip program

and data memory. It can be extended with external program memory

up to 64 Kbytes. It can also access up to 64 Kbytes of external data

memory. For systems requiring extra capability, the P8xC557E6 can

be expanded using standard memories and peripherals.

The P8xC557E6 has two software selectable modes of reduced

activity for further power reduction – Idle and Power–down. The Idle

Mode freezes the CPU while allowing the RAM, timers, serial ports

and interrupt system to continue functioning. The Power–down

Mode saves the RAM contents but freezes the oscillator causing all

other chip functions to be inoperative.The Power–down Mode can

be terminated by an external Reset, by the seconds interrupt and by

any one of the two external interrupts. (see description Wake–up

from Power–down Mode).

64 K

External

64 K

49152

49151

Internal

(EA = 1)

49151

External

(EA = 0)

0

0

Overlapped

Space

255

127

0

INDIRECT

ONLY

DIRECT AND

INDIRECT

Special

Function

Registers

(ARD = 0)

1280 bytes

AUXILIARY

RAM

Program Memory

Internal

Data Memory

Figure 4. Memory map & address space.

1280

(ARD = 1)

0

External

Data Memory

1999 Mar 02

8

Share Link: