CMX631A 查看數據表（PDF） - CML Microcircuits

零件编号

产品描述 (功能)

比赛名单

CMX631A

Low Voltage SPM Detector

CML Microcircuits 

Low Voltage SPM Detector

CMX631A

5.1.2 Aliasing

Due to the sampling nature of switched-capacitor filters used in the CMX631A, high frequency noise or

unwanted signals can alias into the passband, disrupting detection. External components must be chosen

carefully to avoid alias effects.

Possible Alias Frequencies:

12kHz Mode = 52kHz

16kHz Mode = 69kHz

If other filtering in the system has not attenuated these alias frequencies, capacitors should be employed

across resistors R1 and R4 to provide anti-alias filtering.

The low-pass cutoff frequency should be chosen to be approximately 20kHz to 25kHz for a 12kHz system, or

25kHz to 30kHz for a 16kHz system.

i.e.

C=

1

2 x π x f0 x (R1 or R4)

When anti-alias capacitors are used, an allowance must be made for reduced gain at the SPM frequency

(12kHz or 16kHz).

The ‘Clock-Out’ Pin

The Clock-Out pin is intended to drive the CMX631A Clock-In pin only. It is not recommended that it be used to

clock other devices within the host equipment.

© 1998 Consumer Microcircuits Limited

10

D/631A/1

Share Link: