NJU3504FA1 查看數據表（PDF） - Japan Radio Corporation

零件编号

产品描述 (功能)

比赛名单

NJU3504FA1

4-BIT SINGLE CHIP MICRO CONTROLLER

Japan Radio Corporation  

NJU3504

• STATUS flag(ST)

STATUS flag(ST) is the conditional flag in accordance with the result of the instruction execution. Its

condition is in accordance with follows:

1)to be same as CY flag condition.

2)to be set the condition to "0"(ST=0) when the result of the logical calculation(AND, OR, XOR, YNEA)

is zero.

3)to be set the condition to "0"(ST=0) when the result of the comparison(CMP) is zero.

However, ST flag condition is always set to "1"(ST=1) except above three.

ST flag controls the branch operation. Branch instruction does not branch when ST flag condition is "0",

and branches when ST flag condition is "1". ST flag condition is kept until the end of the next instruction

executing cycle.

The ST flag condition is unknown on the “RESET” operation.

(3) FUNCTIONAL BLOCK

• ARITHMETIC LOGIC UNIT(ALU)

ARITHMETIC LOGIC UNIT(ALU) is a 4-bit binary paralleled calculation circuit operating binary addition,

binary subtraction, comparison, logical AND, logical OR, exclusive OR, and SHIFT(Rotation). And it also

can detect CARRY, BORROW or ZERO in accordance with the result of each calculation.

• PROGRAM MEMORY(ROM)

PROGRAM MEMORY(ROM) consists of 2 banks, a bank consists of 32 pages, and a page consists of

64 bytes memory capacity. Therefore the NJU3504 prepares the 4096-byte ROM for the application

program. The ROM address is indicated by the Program Counter(PC).

[PROGRAM MEMORY AREA]

(Addresses)

000H

Bank0

7FFH

800H

Bank1

Program Start Address

(Addresses in the bank)

000H

040H

080H

Page0

Page1

Page2

FFFH

780H

7C0H

7FFH

Page30

Page31

Bank0

(Addresses in the page)

00H

64 Instruction Words

3FH

* 8 Bits / Instruction Word

64 Instruction Words / Page

32 Pages / Bank

2 Banks / ROM

-8-

Share Link: