SAF-XC835MT-2FGI 查看數據表（PDF） - Infineon Technologies
零件编号
产品描述 (功能)
比赛名单
SAF-XC835MT-2FGI Datasheet PDF : 56 Pages
| |||
XC835/836
Electrical Parameters
3.2.5 Power Supply Current
Table 15 provides the characteristics of the power supply current in the XC835/836.
Table 15 Power Consumption Parameters1) 2)(Operating Conditions apply)
Parameter
Symbol
Limit Values Unit Test Condition
Typ.
Max.
Active Mode
IDDPA
23
28
16
20
mA 5 V / 3.3 V 3)
mA 5 V / 3.3 V 4)
–
5
mA 2.5 V5)
Idle Mode
IDDPI
18
25
–
5
mA 5 V / 3.3 V 6)
mA 2.5 V 5)
Power Down Mode 1
IPDP1
3
5
µA TA = 25° C7)
–
28
µA TA = 85° C7)8)9)
Power Down Mode 2
IPDP2
6
8
µA TA = 25° C7)8)
–
31
µA TA = 85° C7)8)9)
Power Down Mode 3
IPDP3
5
7
µA TA = 25° C7)8)
–
30
µA TA = 85° C7)8)9)
Power Down Mode 4
IPDP4
5
7
µA TA = 25° C7)
–
30
µA TA = 85° C7)8)9)
1) The typical IDDP values are measured at TA = + 25 °C and VDDP = 5 V and 3.3 V.
2) The maximum IDDC values are measured under worst case conditions (TA = + 125 °C and VDDC = 5 V).
3) IDDP (active mode) is measured with: CPU clock and input clock to all peripherals running at 24 MHz
(CLKMODE=0).
4) IDDP (active mode) is measured with: CPU clock and input clock to all peripherals running at 8 MHz
(CLKMODE=1).
5) This value is based on the maximum load capacity of EVR during VDDP = 2.5 V. Not subject to production test,
verified by design/characterisation.
6) IDDPI (idle mode) is measured with: CPU clock disabled, watchdog timer disabled, input clock to all peripherals
enabled and running at 24 MHz (CLKMODE=0).
7) IPDP1, IPDP2, IPDP3 and IPDP4 is measured at 5 V and 3.3 V with: wake-up port is programmed to be input with
either internal pull devices enabled or driven externally to ensure no floating inputs.
8) Not subject to production test, verified by design/characterisation.
9) IPDP1, IPDP2, IPDP3 and IPDP4 has a maximum values of 120 uA at TA = + 125 °C.
Data Sheet
35
V1.2, 2011-03
Share Link: 